wallProtex

Textured Vinyl Corner Guard Specification Drawing

buy textured vinyl corner guards

Textured Vinyl Corner Guards

wing size: 3/4"  1 1/8" 1 1/2" 2" 2 1/2" 3"

height: 4 ft and 8 ft standards 

angles: standard 90

material: Vinyl is a commonly used material for interiors and building/construction products. It is chemically and mold resistant, and cleans as washes easily. This corner guard is embossed with a texture to give it soft finish color that blends in well with interior designs.  

color: wallProtex textured vinyl corner guards come in over 50 colors, on of which is sure to match the color you need.

installation: Textured vinyl corner guards can be ordered with pre-drilled holes and screws, self-stick tape, or plain. A plain corner guard can be installed  using construction adhesive such as Liquid Nails.

fabrication: Textured vinyl corner guards can be cut and fabritcated on the job site to fit the size you need.   If you need custom lengths, wallProtex can cut in-line your custom length corner guard (please allow for manufacturing lead time).

Buy Paintable Corner Guard

 Paintable Corner Guard

sizes: 1.25" and .75" widths

lengths: 4' and 8' standard lenghts

mateiral: surface treated polymer and highest ASTM rating for paint adhesion

tape: 1/32" foam tape with permanent rubber-based adhesive

What type of paint should I use? Try to use a water based paint.  Also try to use a high gloss paint as it prevents scuffs and scratches from showing too much. Keep the surface of guard clean during installation and do not apply paint while guard is wet. 

Paintable corner guard is great for matching the decor of your painted interiors while preventing damage being done to the finished corner behind the corner guard.  The Paintable corner guard has an orange peel texture to it that matches interior painted wall texture.

New products do not come around too often it the wall protection world. But customers often times have odd angles that they would like to protect. wallProtex's new universal corner guard will do just that. A flexible hinge in the middle of the product allows this clear durable plastic corner guard to be mounted to every corner from a 45 degree angle to a 135 degree angle, and everything in between.  Other features of this product include:

• can be easily cut with household scissors

• clear durable plastic

• peel and stick fastening

This product can be purchased right from our online store, found here.

Stainless Steel Corner Guards

wing size:1 1/2"

height: 4 ft

angles: 90

material: Type 304 Stainless 16 guage with a #4 finish. Stainless steel corner guards fit in well with modern kitchen decor and industrial design. 

installation: Stainless Stell corner guards can be ordered self-stick tape, or plain. A plain corner guard can be installed  using construction adhesive such as Liquid Nails.

fabrication: It is very difficult to fabricate stainless steel corner guards on the job site, please contact wallProtex for requests for different size.

Stainless steel corner guards can offer your area a professional look and extremely high performance. Used in industrial kitchens, these guards will match the decor of other major appliances and equipment. Stainless steel corner guards can be attached to the corner in two ways: counter sunk holes with screws and a high strength adhesive.  Different finishes can be made upon special request.